Mark, Renner supply ready-made bass damper heads in 4 lengths, I have included the catalogue number 43mm 488B 55mm 488A 67mm 488C 90mm 488D I don't know if RennerUSA is online or not, maybe someone else can help there, but you can call them on 203-221-7500. If they don't have them on hand, it should be available fairly quickly from Germany. I have them in stock here in Australia....but I don't think that's very helpful!! Cheers Mark Bolsius Bolsius Piano Services markbolsius@optusnet.com.au ---------- > From: Mark Graham <magraham@bw.edu> > To: pianotech@ptg.org > Cc: BSimon1234@aol.com > Subject: Extra-long damper wedges > Date: Thursday, January 28, 1999 9:23 AM > > Is there a source for longer-than-usual bass damper wedges for a > one-of-a-kind vertical? Baldwin used to carry them for one of its models, > I remember, but when I called today, the woman said they don't carry > damper wedges at all. > > Will I end up making my own? I only need five for the lowest single > strings. > > Mark Graham > Baldwin-Wallace Conservatory of Music > >
This PTG archive page provided courtesy of Moy Piano Service, LLC