---------------------- multipart/alternative attachment http://www.leevalley.com/intro.htm Lee Valley Tools I find they have now have a web page. Nancy McMillan wrote: > Hi list,A customer of mine has a Heintzman & Co. console, made in > Toronto. The pin block is pulling away from the back frame and I > received the go ahead for the repair. My problem is the bolts going > through the plate into the block and back frame are Thompson bolts ( > square recess in head of bolt) and I can't find any supplier in the > U.S. with this large of Thompson driver. The plate bolts have a > square recess of 3/16" square or roughly 5mm. I wouldn't mind being a > set of Thompson drive sockets so I can tighten up a few other things > on this piano. Any suggestion for tool suppliers from are Canadian > list members?ThanksDoug Mahard, Associate ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d4/00/0f/4d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC