Thanks Jim, I'm calling around now. LANCE LAFARGUE, RPT LAFARGUE PIANO SERVICES New Orleans Chapter Mandeville, LA. _________________________________ II III II III II III II III II III II III II III II III II III II ----------------------------------------------------------- lafargue@iamerica.net "Learn from the mistakes of others. You can't live long enough to make them all yourself." ---------- > From: JIMRPT@AOL.COM > To: pianotech@ptg.org > Subject: Re: Nickel plated washers/parts > Date: Friday, July 09, 1999 10:30 AM > > > In a message dated 7/09/1999 10:54:24 AM, Lance wrote: > > <<1)Can anyone suggest a supplier for nickel parts. Specifically, I am > looking for washers to put under the heads of plate bolts after > refinishing. >> > > Lance; > I solved this problem by using stainless steel washers...two advantages 1. > No chipping/flaking of the plating and 2. More readily available. Buffed up > they are hard to tell from plated. > Jim Bryant (FL)
This PTG archive page provided courtesy of Moy Piano Service, LLC