Thanks Joe, I've recently been going thru older Journals and assumed it was in one of those. I appreciate it. The method worked! LANCE LAFARGUE, RPT LAFARGUE PIANO SERVICES New Orleans Chapter Mandeville, LA. _________________________________ II III II III II III II III II III II III II III II III II III II ----------------------------------------------------------- lafargue@iamerica.net "Learn from the mistakes of others. You can't live long enough to make them all yourself." ---------- > From: Joe & Penny Goss <imatunr@primenet.com> > To: pianotech@ptg.org > Subject: Re: Nickel plated washers/parts > Date: Friday, July 09, 1999 11:34 AM > > June 1999 page 8 and 14? > Joe Goss > > > Also, there was recently a small tip in the Journal printed about > > techniques to minimize plate chipping around screws, etc. I can't find > > which Journal I read that in. I believe it was in a tips/tools section > or > > a Q/A roundtable. Thanks. > > > > > lafargue@iamerica.net > > > > "Learn from the mistakes of others. You can't live long enough to > > make them all yourself."
This PTG archive page provided courtesy of Moy Piano Service, LLC