Regulating Woes

[Jon Page]

At 08:35 PM 7/19/99 -0400, you wrote:
>
>The real issue is the balance weight.
>
>The spring tension is critical but adjusting it would be difficult. 
>To do so I would weight out heavy without the springs then engage the
>spring and adjust tension to get the balance weight desired.
>

* Without the spring there may not be an UW

>I don't think I would bother doing much of anything with the friction
>unless it gets well outside the desirable range.
>This is a learning experience so do the best you can and learn from
>the experience.
>
>Get back to work!!
>
>               Newton
> 



Jon Page,  Harwich Port,  Cape Cod,  Mass.  mailto:jpage@capecod.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~