>I have often suspected that the heat from the rod >contributed to the degredation of the material but not being a chemist, I had >no way of proving or even researching that idea. > >Any ideas on this anyone? >Bill Bremmer RPT >Madison, Wisconsin In support of this theory I recently replaced the plastic elbows in a spinet that had a 3 foot long dehumidifier rod. The elbows in the middle crumbled and removed easily but the ones on each end were good and solid. I had to use a soldering iron on the end ones. Ted Simmons Merritt Island, FL
This PTG archive page provided courtesy of Moy Piano Service, LLC