Bob, I've used it only on pianos with plate bushings and I use the thin stuff for that very reason. It gets down past the bushings. I've heard the list member say to cover the action or remove it but the CA has never run through for me. Just remember "YOU MUST HAVE GOOD VENTILATION!!!!!" . Greg Newell Robert Scott wrote: > > To those of you that have used CA on loose pins, what special > application techniques do you use when the plate has plate bushings? > I will be using it for the first time on a Henry Miller grand with > wood bushings and I am concerned that the CA will not flow past the > bushing, or if does, it might run along between the plate and > the block and never find its way down the hole in the block. > > Bob Scott > Ann Arbor, Michigan
This PTG archive page provided courtesy of Moy Piano Service, LLC