Hi Jim, Could you explain, why it would make a difference as to which wire goes where, on the foot switch. I can see it on the charger. Regards, John M. Ross "Jim Coleman, Sr." wrote: > Hi Ed: > > Radio Shack did have several plugs which worked. I used to make my own > thumb switches with plugs from Radio Shack. The length is probably not > as important as the diameter. When you solder the wires on to the new > plug, it is important that you get the right wire to the right terminal > in order for the footswitch to work properly. > > Jim Coleman, Sr. > > On Tue, 23 Mar 1999, Ed Carwithen wrote: > > > The wire on the foot pedal of my SAT has developed a break right at the > > plug end. My friendly Radio Shack has all kinds of plugs, but none like > > this. The break is too close to the plug to repair. I don't need a new > > foot pedal for $75. I need a new plug for $1.89, and some wire. The plug > > is 3/32" and 9/16th" long. Anybody know where I can get a replacement????? > > > > Ed Carwithen > > John Day > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC