Paul, you might use CA glue repairs (see recent posts) or epoxy. I prefer CA. Different folks have different application methods. Are there cracks visible in the pinblock if you look from underneath with action out? are they all in a row - the row farthest away from you? Paul Plumb wrote: > > Dear List, > > I have a Vose grand that needs about 20 pins tightened. I am not in favor > of doping and the plate holes are so small that there is no room to put in > oversize pins. Can I drill out the holes slightly, if so, how and with > what? Or is there a better method? The owner is not willing to replace > the block for cost reasons. > > Paul Plumb, B.Mus., > Plumb Pianos
This PTG archive page provided courtesy of Moy Piano Service, LLC