David, I did as Jim suggests, to a piano in August, although I used just ordinary wood glue. I haven't been back since then to see if I made the globs of glue big enough to solve the problem. Clyde Hollinger "Jim Coleman, Sr." wrote: > HI David; > > It's easier to just put a drop of polyvinyl glue at the bottom of the > curve of these bridle wires. This will keep the bridle strap from riding > down the wire. > > Jim Coleman, Sr. > > On Tue, 23 Nov 1999, David ilvedson wrote: > > > List, > > > > Baldwin, Hamilton type. Bridle straps are falling down the > > bridle wire because it's the straight type with just a little bend > > to hold them on. I tried a little CA to seal the strap but any > > other ideas. I of course can replace the straps if they want to > > spend the money but the design of the bridle wire is the > > problem. > > > > David I. > > > > David Ilvedson, RPT > > Pacifica, CA > > ilvey@jps.net > >
This PTG archive page provided courtesy of Moy Piano Service, LLC