Ultra touch

[Jeannie Grassi]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Pat,
I'm sure you would find it way too hot.  When bending shanks one has
to be constantly careful not to scorch any nearby felt.  I can't
imagine it working for hammer steaming, even on the lowest setting.
But it is an excellent tool for the other tasks you mentioned.

Jeannie
Jeannie Grassi, RPT
mailto:jgrassi@silverlink.net
Bainbridge Island, WA

    -----Original Message-----
    From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On
Behalf Of Pat Neely
    Sent: Wednesday, October 06, 1999 7:04 AM
    To: pianotech@ptg.org
    Subject: Ultra touch


    The ultratouch soldiering iron in the Jensen catalog is good for
removing glue and bending shanks with its hot air it . Does any one
know it it would also work with the hammer steaming tip, for use as
per say in the May journal for steaming hammers. It is a portable
butane soldieing iron 10-440 ultratouch 40si maybe I could save myself
the space of another tool. Pat

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/29/6f/5a/66/attachment.htm

---------------------- multipart/alternative attachment--