In a message dated 9/16/99 11:36:45 PM, agilreath@mindspring.com writes: >enlighten me on the way to disassemble this item? Replacing >the wedge seems quite simple once it's apart. Does the wedged have to >bedrilled out and a new one used or is there a way to remove and reuse the >old Greetings, I have found that drilling a line of 3/32" holes down the width of the wedge lets me take a chisel and break the remaining wood loose. These wedges have to be out for the tenon to pull loose, and it is easier to make a new wedge than save the old one. Regards, Ed Foote
This PTG archive page provided courtesy of Moy Piano Service, LLC