ramp

[Michael Jorgensen]

Hi Jon,
     A local gallery did the same thing with a 6' grand.  After all was
complete, we found that the bolts which secure the caster cups to the
truck protruded down and were catching the carpet at certain angles.
Hack sawing them off was not much fun.

Jon Page wrote:

> I have a project to make a ramp for a church to get a D
> from the seating level up to the center 12" riser .
>
> A truck is a good start. I figure a ramp of 8' x 6' would do the
> trick for 3 or 4 guys to make the transition.
>
> The ramp would consist of four 4' x 3' sections.
>
> Thanks,
> Jon Page,   piano technician
> Harwich Port, Cape Cod, Mass.
> mailto:jonpage@mediaone.net
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~