In a message dated 8/17/2000 7:48:01 AM, Tuner1956@AOL.COM writes: << The *socket that leg bolt screws into spins* so you cannot remove the leg. I have tried to replace the small screws that hold the socket, but have had no success. Any information or suggestions would be appreciated. >> Tim; Couple of things come to mind..........hold the bolt and turn the plate......or drive in some long nails through the plate screw holes and then turn the bolt, make any repairs needful after you remove the plate. For safety, leave the good bolt installed while you are messing with the 'spinner'. ??????? Jim Bryant (FL)
This PTG archive page provided courtesy of Moy Piano Service, LLC