learned that lesson the hard way. Original Message ----- From: Larry J Messerly <prescottpiano@juno.com> To: <pianotech@ptg.org> Sent: Monday, August 21, 2000 11:04 PM Subject: Re: Piano from heck day > Very likely that the Billings flange is cracked where it recieves the > center pin. It has happened to me. Best bet is to replace the flange. > > also for those that don't know, it is not necessary to remove the flange > screw to get these flanges out. when I discovered that I was pleased > with the concept too bad the brass gets brittle. > > Larry Messerly, RPT > Phoenix/Prescott
This PTG archive page provided courtesy of Moy Piano Service, LLC