Kawai Muffler Removal

[Avery Todd]

John,

    Unless I'm misunderstand what you're saying, there's usually a wing nut 
right where
the bar ends on the bass end. Just loosen that a little and it slips right 
up and then
pull it out of the case from the treble end. I hope this isn't too "muddy" and
explanation but it really is easy.
    Unless this is maybe a very early version when Kawai did it 
differently? Hope this
helps.

Avery

At 10:07 PM 01/03/00 -0500, you wrote:
>Is there an easy way to disengage the top of the pull cable from its 
>plastic housing on the bass muffler bar elbow, rather than loosening the 
>screw (sometime frozen) attaching the cross-bar to the elbow? Get what I 
>mean? Any suggestions welcome!
>
>John Lillico, RPT,
>Oakville ON
>