I learned that one the hard way a few years back! -----Original Message----- From: Pianotoone@AOL.COM <Pianotoone@AOL.COM> To: pianotech@ptg.org <pianotech@ptg.org> Date: Sunday, March 12, 2000 1:03 PM Subject: Re: Loose pins >I have had success with the sandpaper method...although the pins sometimes >tend to be a little jumpy. I still think the best method (since you have the >pin out anyway) it to replace it with a bigger pin. Especially on uprights. >However, be careful with grands. You can crack the pinblock, driving in >pins, unless you suppor the block from underneath. > >Dick Day >Marshall MI
This PTG archive page provided courtesy of Moy Piano Service, LLC