Hi Les, I don't think Juno allows attached files of any size. The photo is 57K in size. Please try to download it from this ftp server: The server is IP address 146.187.103.25 You should be able to access this directory by typing into the address box of your browser: ftp://146.187.103.25 and select the file "keycutter3.jpg". It will simply be rendered in your browser as it is downloaded. Then you can save it if you want by using the "Save" selection in your "File" menue. Mark Story, Piano Technician EWU Music Dept, mail stop 100, ph. 7017 ----- Original Message ----- From: "Leslie W Bartett" <lesbart1@juno.com> To: <pianotech@ptg.org> Sent: Friday, March 17, 2000 7:11 AM Subject: Re: jig for keytops > I've obviously missed out on something, puter being down, etc. If there's > a photo of a makeable keytop jig available I'd love to have one. Needs > to be sent to lwbartlett@pdq.net, however. My Juno doesn't take such > things. > thanks > les bartlett > houston
This PTG archive page provided courtesy of Moy Piano Service, LLC