Key bushings

[Kevin E. Ramsey RPT]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
    This is a different approach, but here's what I do;  I clamp the keys in
a couple of Spurlock key clamps and apply a few drops of water/wallpaper
remover on the bushings, and then I insert a hot key bushing iron (available
from Pianotek) into the mortise, and they just practically fall out. I like
the fact that all the steaming action is localized right where you want it.
    Hope this helps.

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8c/c0/78/ed/attachment.htm

---------------------- multipart/alternative attachment--