Kimball Spinet Player

[Phil Bondi]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
I'll try again - copy and pasted from this morning's response...

Ken, Alva is not far from me(30 minutes tops)..and the person I use to =
work on these players would be happy to help.

let me know.

Rook


  ----- Original Messagmailto:KENNETH.GERLER@prodigy.nete -----=20
  From: PAT A RALPH=20
  To: PTG Tech Forum=20
  Sent: 04 May, 2000 11:52 AM
  Subject: Fw: Kimball Spinet Player


  Update:  Still looking for a technician in the Fort Myers, Fl area.  =
according to Paul Koegler at Dancing Ivories (dancingivories@erols.com), =
there is a gear in the rivited together box that fails, your cost =
$125.00.  It is a matter of drilling out the rivets (once you get the =
assembly out of the piano) carefully open up the gear box, replace the =
gear and either rivet or bolt the gear box back together and reassemble =
everything

  Ken Gerler

  ----- Original Message -----=20
  From: PAT A RALPH=20
  To: pianotech@ptg.org=20
  Sent: Wednesday, May 03, 2000 4:21 PM
  Subject: Kimball Spinet Player


  I looked at this Kimball player today. 1.) the people are moving to =
Alva, FL May 8th. 2.) the spool box has a problem (the motor runs the =
the gear assembly doesn't move) and needs repair. 3.) I have a call into =
"Dancing Fingers" 631-242-0963 for parts or ?

  I advised the customer I would try to find a technician where they are =
moving and give them their name and who ever responds to me I will in =
turn give them your name.

  Thanks in advance :-)
  Ken Gerler

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/86/a2/c5/1d/attachment.htm

---------------------- multipart/alternative attachment--