CA glue vs. PinTite

[robert goodale]

My first course of action is ALWAYS to first pound the pins deeper into the block,
(assuming that there is room to do so).  In the majority of cases this adds enough
friction, (sometimes considerably), to not have to take any further course of
action.  No chemicals, no mess, no risk of damaging the block.

Rob Goodale, RPT
Las Vegas, NV


Clyde Hollinger wrote:

>  I would like to know whether to use CA glue or Garfields or Pin-Tite pin
>  treatment for loose tuning pins.  What do you prefer and in what
> circumstances would you use one type of treatment over the other.
>
> Thanks,
>
> Eliot Lee