Changing a wire on a spinet

[Kevin E. Ramsey RPT]

I don't know who makes it, but PIanotek sells it. I have one, and have used
it successfully on a few pianos. In a pinch, I suppose you could use a
curtain rod. Works the same but is thicker.Good Luck.
----- Original Message -----
From: "Phil Bondi" <tito@PhilBondi.com>
To: "Pianotech List" <pianotech@ptg.org>
Sent: Friday, November 10, 2000 5:27 AM
Subject: Changing a wire on a spinet


> I have been told to ask this list to find out if there is someone out
there
> who manufactures a tube that will aid someone in replacing a wire on a
> spinet without pulling the piano apart.
>
> Yes, I need one.
>
> Rook
>
>