HVLP NEW TOPIC!!!!!!!!

Paul tunenbww@clear.lakes.com
Tue, 21 Nov 2000 08:05:10 -0600


This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Jon

Does your HVLP system use a turbine and heated air? I'm looking at =
getting the compressed air type to avoid the problems of water based =
finishes drying too fast to flow out along with other problems. Have you =
or anyone on the list tried/have a gravity feed gun?

Paul Chick
  ----- Original Message -----=20
  From: Jon Page=20

  This topic has cropped up from time to time.

  I use an Apollo 800+ and like it very much, be sure to get the quick =
release cup and not the screw-on type.
  An internet search for HVLP will give you lots of info.

  I have heard from those more involved spraying that Binks makes a =
Conversion Gun which turns
  compressed air into HVLP. If you already have a compressor, I'm told =
this is the better way to go.

  Regards,



  Jon Page,   piano technician
  Harwich Port, Cape Cod, Mass.
  mailto:jonpage@mediaone.net
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d0/be/a5/03/attachment.htm

---------------------- multipart/alternative attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC