I as a last resort if not aailable elsewhere would contact Mason & Hamlin at: 35 Duncan Rd Haverhill, MA 01830 (978) 374-8888 and see if they have any of these hangers and clips of this style available. Walter GramzaAt 08:25 PM 11/28/00 -0500, you wrote: >Pianotech, >I have a customer who has a Mason & Hamlin console made in 1947. It has >a damper lift rod part which is broken. It is the part which the >hangers on the rod go into which has a felt bushing. This part has a >slot which is adjustable and can tear out. I was wondering if anyone >has seen this before and if a suitable replacement part is available, if >not,is there something I could use in its place? >Any solutions or ideas on how I can make this repair would be >appreciated. > >Thanks, > >Arthur Chickering >Rockland,Maine >
This PTG archive page provided courtesy of Moy Piano Service, LLC