----- Original Message ----- From: Richard Brekne <Richard.Brekne@grieg.uib.no> To: <pianotech@ptg.org> Sent: Tuesday, October 17, 2000 4:55 PM Subject: Re: Sohmer > > > Lynn Rosenberg wrote: > > > The tuning stability was poor only because of savere humidity > > changes. I bet those pianos would have been very stable if they're was > > proper humidity. Lynn > > > > And thats what it really all cooks down to aint it ? No piano is going to stay > stable, or even stand up structurally in the long run, unless its given a good > "home". Treat em right and even all but the most hopelessly bad will behave > themselves... treat em wrong and even the best of the best will fall apart. > > > > > > ----- Original Message ----- > > From: Newton Hunt <nhunt@jagat.com> > > To: <pianotech@ptg.org> > > Sent: Tuesday, October 17, 2000 9:19 AM > > Subject: Re: Sohmer > > > > > > Sohmers that were made in New York city were much more > > > > stable, then the ones made in Conneticut and Pennsylvania. > > > > -- > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC