>So often these makers use bridge pin inclinations which are insufficient and >a string offset angle which is often below 10 degrees. > >I learned a lesson the hard way a recently. Ten degrees of string offset >angle and twenty degrees of pin inclination certainly works well. --------------------------------------- > I have suspected for while that insufficient string offset >angle to contributes to falseness. The bungled bridge cap saga prove it! Hi Ron, You use a little more inclination angle than I do, but yes - I agree. insufficient inclination and offset angles just don't clamp the string down well enough for positive termination. Some caveats apply. <G> Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC