Rather that rebuild the wippens, why not purchase new ones? The best way is to contact Renner and purchase the parts kit then use them as a sample in the action to see which one will work correctly. Dave Peake, RPT Portland Chapter Oregon City, OR www.davespianoworks.locality.com In a message dated 09/07/2000 10:27:58 AM Pacific Daylight Time, foxmeadow@juno.com writes: << List, A fellow technician (who is not subscribed) has an old Steinway "O" (approx 1910-15) and is rebuilding the action. The problem that he wishes to address is the lack of jack adjustment. There is only a piece of felt where the top of the jack come to rest in the repetition lever window, but no screw to adjust the fore and aft position of the top of the jack. Does anyone have a suggestion for rebuilding these wippens? Right now, he sees his options as 1) total replacement, or 2) painstakingly trimming new felt to position the jack in the correct position. Todd L. Mapes PTG Associate Member Fort Smith, AR ______________________ >>
This PTG archive page provided courtesy of Moy Piano Service, LLC