Pitch Raise Sequence

Farrell mfarrel2@tampabay.rr.com
Sat, 9 Sep 2000 15:13:10 -0400


I agree totally Ed. If your piano is 50 cents flat to begin with, you will
end up with a tenor and treble section that is about 12 to 20 cents flat.
And then if you don't overpull the next pass, you will still be about 6
cents flat in the treble. You'll really need that two pass tuning after
that.

Terry Farrell
Piano Tuning & Service
Tampa, Florida
mfarrel2@tampabay.rr.com

----- Original Message -----
From: <A440A@AOL.COM>
To: <pianotech@ptg.org>
Sent: Saturday, September 09, 2000 2:42 PM
Subject: Re: RE: Pitch Raise Sequence


> David writes:
> << I "never" over-pull!  I take my FAC
>
> readings in relation to A440 pitch...yes I bring those strings up to pitch
>
> no matter where the piano is at pitch-wise...I start at A0 and tune each
>
> string as I go quickly, 15 minutes.  For me, overpull is going to mean a
>
> sharp piano when I start tuning.  >>
>
> Greetings,
>      Isn't the middle of the piano flat by the time you have finished the
> top? When I don't overpull, I have a flat piano when I start tuning.
> Regards,
> Ed Foote RPT
>



This PTG archive page provided courtesy of Moy Piano Service, LLC