Could you copy me with info? Thanks Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: "Paul" <tunenbww@clear.lakes.com> To: <pianotech@ptg.org> Sent: Tuesday, September 12, 2000 9:11 PM Subject: Re: Plate Bushings > John > I'm interested in your process. You can send the info privately if you wish. > Thanks! > > Paul Chick > ----- Original Message ----- > From: John R Fortiner <pianoserv440@juno.com> > To: <pianotech@ptg.org> > Sent: Thursday, September 07, 2000 12:37 AM > Subject: Re: Plate Bushings > > > > OK Newton: I thought you always had the answer for anyone's questions > > :-) > > Considering that I KNOW you have a bandsaw, and mostlikely a drillpress > > - make them. If you want to know how I do it just write to me personally > > and I'll be glad to describe to the best of my ability. Really a pretty > > easy job once you set up for it. > > I could even send a drawing of the jig that I use on my drill press and > > on the bandsaw and would be glad to do so if that is what you want. > > > > John R. Fortiner > > Billings, MT. > > pianoserv440@juno.com > > > > On Wed, 06 Sep 2000 13:59:13 -0400 nhunt@jagat.com (Newton Hunt) writes: > > > Is there anyone out there who has a source of 0.500" plate > > > bushings? > > > > > > APSCO has 7/16 but not 8/16". Schaff has 6/16". > > > > > > I have a thick plate as well as a thick head. > > > > > > Newton > > > > ________________________________________________________________ > > YOU'RE PAYING TOO MUCH FOR THE INTERNET! > > Juno now offers FREE Internet Access! > > Try it today - there's no risk! For your FREE software, visit: > > http://dl.www.juno.com/get/tagj. > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC