Terry, At 18:31 09/23/2000 -0400, you wrote: >> Second, consider a longer bit, they do >> come as long as 12" but that may be too long. >> The high spiral longer bits can be purchased from him or >> from Geneva Imports or do a search for longer bits on the >> nets. >Great! That is all I need. If I can get an 8" long pinblock drill bit of >appropriate diameter, I will be all set. I will call Webb/Geneva Monday >morning. This was the info I was looking for. Thanks a bunch. The method I used was to have a good welder weld an extension to the bit, and I cut _that_ (milder steel) to the length I needed. Gotsta be a good welder, though. Wobbly bits don't help much. Conrad Hoffsommer - Luther College, Decorah, IA Eschew Obfuscation.
This PTG archive page provided courtesy of Moy Piano Service, LLC