PinBlock Drill Press

[David Ilvedson]

Newton,

Can you translate for us?

David I.

-----Original Message-----
From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf
Of Newton Hunt
Sent: Saturday, September 23, 2000 6:23 PM
To: pianotech@ptg.org
Subject: Re: PinBlock Drill Press


There is a very flexable Japanes saw for cutting flush.  It
has not set to the teeth.

A good sharp chisel is an excellent tool.

Welcome

		Newton