If, according to Newtons' wonderful technical discussion of how CA"S work, moisture is the main cause of curing, why can't one just spray with water as an accelerator? That would be great! Cost effective and non-toxic. (come to think of it, we have to go get water to drink every week :-(( Dian >From: Leslie W Bartlett <lesbart1@juno.com> >Reply-To: pianotech@ptg.org >To: pianotech@ptg.org >Subject: Re: Enlightenment >Date: Sun, 24 Sep 2000 13:26:44 -0500 > > One reason for not using the usual > > accelerator, 1-1-1 > > Trichlorethelyne, (not sure about that spelling) is that it is toxic > > and > > causes the CA glue to emit highly toxic fumes. > If trichlorethelyne is actually an acellerator, it can be purchased for >about $10 per quart at hardware stores, used as a solvent for cleaning. >One of the local rebuilders uses it a lot to clean the green gunk out of >bushings, since carbon tetrachloride isn't available. If one is going to >"accelerate" the CA glue, it's sure cheaper by the quart than the little >one or two oz. bottles. >les bartlett >houston >________________________________________________________________ >YOU'RE PAYING TOO MUCH FOR THE INTERNET! >Juno now offers FREE Internet Access! >Try it today - there's no risk! For your FREE software, visit: >http://dl.www.juno.com/get/tagj. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com.
This PTG archive page provided courtesy of Moy Piano Service, LLC