Ivories get cupped over the years. The middle portion is depressed and the edges are raised. Ever level a set of key where it REALLY depended on where you set your measureing device? Lay a straight edge across them and it is pretty hard to decide what to call the keytop top. It looks bad and feels bad when cupping is present. So you sand them flat, like they were when new. Also, when they are worn, the ivory grain has a texture to it that is lost when sanded and buffed. The question was whether one can use a proceedure to return some of the grain feel/look. Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: <Wimblees@AOL.COM> To: <pianotech@ptg.org> Sent: Thursday, September 28, 2000 10:55 PM Subject: Re: ivory grain > In a message dated 9/28/00 6:43:58 PM Central Daylight Time, > lovedg@hotmail.com writes: > > << Does anyone know the technique for raising the grain on ivories after they > have been sanded. > > David Love >> > > > Why would you want to raise the grain? Why are you sanding ivories? > > Willem >
This PTG archive page provided courtesy of Moy Piano Service, LLC