Plate Lettering

[Phil Romano]

Hi Terry,

Try a black paint marker (available at office supply stores etc.) to paint
the raised letters. Then clear coat over top of that. Works great for me.

Phil Romano
Myrtle Beach, SC

----- Original Message -----
From: "Farrell" <mfarrel2@tampabay.rr.com>
To: <pianotech@ptg.org>
Sent: Saturday, April 21, 2001 9:44 PM
Subject: Re: Plate Lettering


> A closely related item: Any recommendations for a slob with absolutely NO
> artistic ability to paint the raised letters for the manufacturer's name
on
> the plate (as well as the few other things like "capo....", "patented bla
> bla", etc.)? The only thing I can think of doing is to use a small artist
> brush and some black enamel and then clear coat the plate. I am only able
to
> picture a mess (and my gold plates come out sooooo beautiful otherwise) if
I
> try to do this myself (and I don't know any artists). Does anyone have any
> special tricks or techniques or whatever that could bring success to this
> artistic misfit?
>
> Terry Farrell
> Piano Tuning & Service
> Tampa, Florida
> mfarrel2@tampabay.rr.com
>
> ----- Original Message -----
> From: "David Love" <davidlovepianos@hotmail.com>
> To: <pianotech@ptg.org>
> Sent: Saturday, April 21, 2001 11:35 AM
> Subject: Plate Lettering
>
>
> > In the past I have put the wire gauges on a newly refinished plate by
> using
> > press type and shooting clear lacquer over them.  This has become a
RPITA.
> > I would prefer now to find a set of stamps 12-22 with half sizes that I
> can
> > just ink and stamp.  Any suggestions where I can buy a ready made set?
> >
> > David Love
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
>