Small Bridge Pin Source

[jolly roger]

Hi Terry,
               Harpsicord suppliers and buiders.  Try Stephen Birkett he
will know where to get them.
Roger
       


At 02:03 PM 8/8/01 -0400, you wrote:
>Hi folks. I am repinning the bridges on an old square grand today (or rather
>I was) when I realized I do not have the proper size pin for the treble
>area. The old pins were 0.068" diameter. This would be a about a #5 pin. I
>checked catalogs from Pianotek, Schaff  & APSCO and the smallest pins they
>have are #6 pins which are 0.076" diameter. It is super tight quarters in
>this area of the bridge, and I fear that using the #6 pins may cause
>problems. Anyone know of a source for #5 pins?
>
>Terry Farrell
>