I used it for two years. I works OK. I recently purchased the key leveling kit from Carl Meyer and find I am getting much better & consistent results. Terry Farrell ----- Original Message ----- From: "jolly roger" <baldyam@sk.sympatico.ca> To: <pianotech@ptg.org> Sent: Wednesday, August 22, 2001 9:01 PM Subject: Re: Jaras muti-function Tool (key leveling , dip,etc.) > Hi Phil, > The key levelling tool is great for setting glide bolts, but > not much else. Any bench regulation is a rough in at best. I use mine for > just that and no more. The string height measuring feature is great, if > you bore you own hammers etc. > Regards Roger > > > At 04:34 PM 8/22/01 -0500, you wrote: > >I'm interested in possibly purchasing this tool from Schaff. As the total > >cost is around $200 , I hesitate to buy without a test drive. Anyone on the > >list using this tool? Your opinion would be appreciated. > > > >Thanks > > > >Phil Frankenberg > >Chico, Ca. > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC