New Wurlitzer's Dampers

[ROBOTUNER@AOL.COM]

---------------------- multipart/alternative attachment
      New Wurlitzer Grands are made by Samick,just like Kohler and 
Campbell.There are two screws on the  bass damper guide rail that are usually 
loose,and since the guide isn't glued on,it shifts to one side.I use a flat 
screw driver wedged between the plate and the high end of the bass guide rail 
and push the bridge to left and tighten the screws while still applying 
pressure to the guide rail.Check to see of course which side the dampers are 
bleeding from.Usually the left string on all bichords are bleeding.I would 
suggest you look at the screws on the treble guide rail too.I work on alot of 
Kohler grands and I used to waste alot of time bending wires untill I figured 
out the guide rails were shifting.        Robin Olson  RPT  

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9a/d2/a2/24/attachment.htm

---------------------- multipart/alternative attachment--