Ron Shiflet writes: > I have a friend who is moving and has a Lester Grand to move. ... > I could not pull the action..... > What am I missing? Ron, Is this a folding fallboard? If so, it needs to be NOT folded to remove the fall/block/keyrail assembly. In other words, close the fall, lift it to 45 degrees, lift slightly, trip the blocks off any pins or action hold-downs, and pull the whole thing up and toward you. If it is not a folding fallboard, the same instructions should apply - that is, be sure to trip the keyblocks off anything in their way. Good luck, Bob Davis
This PTG archive page provided courtesy of Moy Piano Service, LLC