---------------------- multipart/alternative attachment In a message dated 7/3/01 1:28:18 PM Central Daylight Time, piano.tech@ns.sympatico.ca writes: > Hi Tom, > I forgot to say, there are two sizes of plugs. The one to use would probably > be the one that just fits, without having to drill any appreciable amount > from the plate. > Good luck, it has worked for me. You could also epoxy them in as well, > instead of the CA. > Regards > John M. Ross > I have a question regarding the plugs. I just fit and drilled a Baldwin grand block. Like a Steinway, this plate doesn't use plate bushings. The plate holes are just big enough for a tuning pin. How do you plug one of these? I have heard you can drill out the plate, but how do you fix the plate after every thing is done? Willem ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cd/a6/c4/54/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC