---------------------- multipart/alternative attachment Be careful not to scratch the floor when/if pulling the piano out from the wall. Moving pads under the wheels are useful for this. Get a tilter, maybe they want double rubber wheels installed also for easy moving to clean behind. Don't lean it, work on it either vertically or horizontally. The Becket Tool will help to keep the beckets lined-up. A general quote for replacing a set is $500.00. 1 hour to make a pattern and mic the first and last string of single wound and bichords and trichord (if any). 2 to 3 hours to install. Then there's the pulling up and followup tunings, plan three in the following two months. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net http://www.stanwoodpiano.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d1/dc/ff/aa/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC