There could possibly be a name cast into the BOTTOM of the plate. Pull the bottom kick board off and look around the parameter of the plate. Sometimes the casting companies put there own identification on them. It may only be a small indentation on the casting where an I.D. tag was attached to the original molding. Rob Goodale, RPT Las Vegas, NV Doepke Family wrote: > I have a customer with an old upright that has serial number as the only > identifying feature. There is no name or label, and if there was one on the > fall board, it has been painted over. > > The number on the plate is 120912. > > How can I find out what type of piano it is without a name or a label? Am I > stuck? > > Brian
This PTG archive page provided courtesy of Moy Piano Service, LLC