David & List Thanks! It worked, I just had to hit the up-note button. Why couldn't the manual mention this? Oh well, I'll just have to wait for the SAT IV to come out. Thanks again. Phil Ryan Miami Beach, FL -----Original Message----- From: David Love <davidlovepianos@earthlink.net> To: pianotech@ptg.org <pianotech@ptg.org> Date: Tuesday, July 31, 2001 10:49 AM Subject: Re: SAT III Question >The machine won't auto step the sequence. You must either move it manually >by pushing the note up to get you through the sequence, or note down to go >back through the sequence. You can also use the foot switch. Once you are >through the sequence you can go to auto step to move chromatically up or >down. > >David Love > >----- Original Message ----- >From: "Phil Ryan" <pryan2@the-beach.net> >To: <pianotech@ptg.org> >Sent: July 31, 2001 5:49 AM >Subject: SAT III Question > > >> I'm trying to use the sequencing feature on the machine to follow the >order >> of a temperament. I follow the directions in the manual to store the >> sequence, but when I go to USE the sequence, nothing happens. >> >> I load the page for the piano then I load the sequence number (SE 2), >which >> I have stored previously, then the auto note stepping, but nothing >happens. >> The machine changes notes only chromatically as is normal. What am I >doing >> wrong? Is there a way to view the programmed sequence order manually to >> see if they are stored correctly? Can SE 1(Baldassin-Sanderson >Tempermant) >> be erased accidentally? Any help would be appreciated. >> >> Phil Ryan >> Miami Beach, FL >> > >
This PTG archive page provided courtesy of Moy Piano Service, LLC