Isaac, Thanks for this latest update. Did Mr. Martin send this by email, and if so, would you please provide his address? Thanks, jeannie Jeannie Grassi, RPT Associate Editor, Piano Techncians Journal mailto:jgrassi@silverlink.net -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Isaac OLEG SIMANOT Sent: Friday, June 15, 2001 1:50 AM To: Pianotech Mailing list Subject: Danair tip Hello list, I received this from Mr DANAIR ( this tool is great !) Dear Mr. OLEG : The #AS-154 Stroke Control Spacer only adjusts the depth of drive and not the hammering stroke. There has been an increasing interest in the Danair Palm Nailer for driving tuning pins. In the past we have made some special guides for several piano manufacturers. We are currently in the process of manufacturing this guide again and it will be ready in about 2 weeks. This guide will allow the pin to be driven with the wire attached if desired. It will also leave the pin standing 3/4" which I feel is what you are interested in. The guide is also longer and will allow easier access when driving next to other pins. The part number is 109-8-SPL and is $35.95 and I feel it will be more suited to your requirements than the AS-154 or additional 111 Spacer. Sincerely, DANAIR, INC. James Martin, VP Sales & Marketing Isaac OLEG
This PTG archive page provided courtesy of Moy Piano Service, LLC