This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Kevin, Yes I will have a booth there and will save you a block <G> Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Kevin E. Ramsey=20 To: pianotech@ptg.org=20 Sent: Monday, June 25, 2001 4:20 PM Subject: Re: Impact Lever Joe, does this mean that you're going to have a booth at Reno? = Save one of those hammer leveling sanding block thingees for me, will = you? Kevin E. Ramsey ramsey@extremezone.com=20 ----- Original Message -----=20 From: Joe & Penny Goss=20 To: pianotech@ptg.org=20 Sent: Monday, June 25, 2001 5:27 AM Subject: Re: Impact Lever Hi Dave, Are you going to be at Reno? I may have a new design by then. check nthe site below. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Dave Bunch=20 To: pianotech@ptg.org=20 Sent: Sunday, June 24, 2001 9:26 PM Subject: Impact Lever I was thinking of trying an impact tuning lever. I have chronic = pain in my neck, shoulder, elbow, numbness in my fingers, etc., etc. = I've heard that these things can be helpful. I see two in my catalogs. One is from Schaff with the adjustable = weight and the other is a Mehaffey from Pianotek. Does anyone have any = opinons on which is the best, or neither of the above? Any input is = appreciated. Dave Bunch ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/02/ca/1c/cf/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC