Please forgive me for questioning, but are you sure the APSCO flanges are not what you are looking for? Did you consider their part #24504 on page 77. I have used these on the type of Chickering wippen you describe and they fit fine. Are yours a different size? Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: <RustRazor@AOL.COM> To: <pianotech@ptg.org> Sent: Friday, March 09, 2001 1:07 PM Subject: Reverse wippens for old chickering > I need to replace wippens in an old Chickering Grand. The wippens are of the > sort where the bushing for the wippen flange is in the wippen - not in the > flange...kind of similar to the standard hammer flange assembly. The wippen > flanges are the flat brass ones similar to the billings flanges. > > Anyone have a source for these things?...or suggestions about adapting a > modern wippen to this situation? Schaff and APSCO do not have these > available. > > Thanks - Matt Wynne, Suffolk, NY chapter >
This PTG archive page provided courtesy of Moy Piano Service, LLC