This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment At least you didn't suggest that I dump the spit out of it! ----- Original Message -----=20 From: VOCE88@AOL.COM=20 To: pianotech@ptg.org=20 Sent: Sunday, March 18, 2001 8:40 PM Subject: Re: tuning fork In a message dated 3/17/01 6:59:32 PM Eastern Standard Time,=20 r.a.wolff@worldnet.att.net writes:=20 According to my SAT III, my tuning fork is 2.5 cents flat. I'm = guessing=20 that I can change this by filing something off of the fork- do I = take some=20 from the upper ends, bottom end, middle?=20 No, don't file it at all. Just push in the slide a bit. (A little = brass humor)=20 Richard Galassini=20 Cunningham Piano Co. & Factory=20 Philadelphia, Pa.=20 1 (800) 394-1117=20 http://hometown.aol.com/voce88/cunn.html=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0c/7e/aa/61/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC