---------------------- multipart/alternative attachment In a message dated 5/2/01 6:44:19 PM Central Daylight Time, Ray@Bentley.net writes: > How do you repair a broken damper rod hook? I had two of them silver > soldered by someone else. One has lasted for many years. But the most > recent one only held for about 4 weeks. One my mentors from way back told > of using a smooth nail of the correct diameter bent at a 90 degree angle > fitted into the rod. Schaff has replacement pins which are straight. I > assume they have to be bent after installation. They're very inexpensive, > but a minimum order would have to be placed. Has anyone else tried the > nail approach? Any other suggestions? > > Thanks for any ideas! > > Ray T. Bentley, RPT > > Hi Ray Yes, I've done the nail method. It works great, and it's cheap. You just have to fine the right size nail, and swedge it in. Good luck. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c4/fa/a0/a1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC