CP contamination on Yamaha S 400-B

[Joe & Penny Goss]

Mark,
Yes, but I use my own product
It is a very low smell blend of oils. See at my site below.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message -----
From: "Mark Dierauf" <mark@nhpianos.com>
To: "pianotech" <pianotech@ptg.org>
Sent: Friday, May 04, 2001 9:55 AM
Subject: Re: CP contamination on Yamaha S 400-B


> Joe Goss wrote:
>
> Is there any discoloration on the flange parts? It sounds like someone =
> has used the graphite with an oil carrier to lube the center pins.
> You might try removing the hammers and washing out the gunk.
>
> Joe -
>   There is a small amount of discoloration on the flange, and now that I
> think of it, it seems to run along the grain of the wood. Have you had
long
> lasting results from washing? How aboat Naptha for a washing agent?
>
> Thanks,
>
> Mark Dierauf
>