jolly roger wrote: > >I have to aggree 500 % > >-- > >Richard Brekne > > Hi Richard, > Bin thar done that with both. But I have now come full > circle, and tend to do more repinning. Just keep the lubs for fast and > budget jobs. What ever is causing the sluggishness needs to come out. > Repinning tends not to come back and haunt you, lubs seem to give you just > a 50/50 shot at curing the problem. > Just my take on the issue. > Roger Grin... as much as I was in aggreement with Keith about proteck visa vi CPL... I am in even more aggreement with this line. Nothing beats repinning....except perhaps rebushing and repinning... with a dash of teflon powder worked into the mix... 987 % behind you here.. :) -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no
This PTG archive page provided courtesy of Moy Piano Service, LLC