----- Original Message ----- From: "Overs Pianos" <sec@overspianos.com.au> To: <pianotech@ptg.org> Sent: May 10, 2001 1:45 PM Subject: Re: Re: Spurlock shimming method. > >Even suitably dense timbers undergo compression set. > > Agreed, but a proper choice of wood strength (density) and sectional > sizes with suitable bracing may well reduce compression set to > virtually zero in the belly rail, while on the other hand nothing > could prevent compression set in a sound board panel. ----------------------------------------------- Exactly. And both the foundation for the arch and the material the arch is made of must both be exceptionally rigid for the thing to work. Or the radius of the arch must be very small, indeed. Hence, my assertion that this is not part of the mechanism that either forms or sustains crown in the piano soundboard assembly. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC